Home Products High Precision Die Cutting Machine with CCD auto position system
High Precision Die Cutting Machine with CCD auto position system
Optional Mechanism
  • EPC

    EPC

  • CCD screen

    CCD screen

  • CCD lens

    CCD lens

  • Auto movable Stacking

    Auto movable Stacking

  • Shaftless device

    Shaftless device

  • New following material connection platen

    New following material connection platen

Prev
Next
High Precision Die Cutting Machine with CCD auto position system
Optional Mechanism
  • EPC

    EPC

  • CCD screen

    CCD screen

  • CCD lens

    CCD lens

  • Auto movable Stacking

    Auto movable Stacking

  • Shaftless device

    Shaftless device

  • New following material connection platen

    New following material connection platen

Optional Mechanism:

EPC, CCD screen, CCD lens, Auto movable Stacking, Shaftless device, New following material connection platen

Application:

Optical film, Plastic film, e.g.: ITO, Diffuser, Reflects film, Brightness Enhancement Film (BEF), Soft PCB, Composite material. The material are not cracked while cutting.





Description:

  • Max. cutting square is 1500x1500mm special for punching material used in large LCD panel. The machine cutting capability can be reached 80 times/per minute in continuously die cutting running, which the production capability is upgrade 2.5 times than the traditional hydraulic machine.
  • PLC computer touch-panel screen control system – clear & easy in operation.
  • Full Servo drive type, high speed die cutting, Full die cutting and half die cutting in process.
  • Equipped with high precision mold high fine adjustment control, Four-columns can be micro-adjusted independently by computer setting parameter, to save time and to raise the production rate.
  • Precision die cut position matching; save time & accurate in die cut mold replacement. Die mold less worn, Long lifetime in use. Also, Optional equipped with knife mold rotative mechanism, it makes the knife mold replaced convenient.
  • The knife mold board is available to be replaced in any size in large die cutting machine.
  • Equipped with specific transmission mechanism, while the knife mold reaching cutting BDC, it will lower down the cutting speed and make the cutting working staple. No burr or No press indentation occurred on finished product, Makes high yield rate of the production.
  • Equipped with safety shelf and safety sensor on each size of machine in order to avoid any dangers while operation.
  • Non-hydraulic design, no pollution, low vibration and low noise, to save more than 30% of energy loss comparing with traditional hydraulic machine, best for using in dustless room.
  • Optional mechanisms: Rewind stacking system, Unwind system (shelf system or shelfless system).
  • Valuable, full-featured equipment, to improve plant ROI.

SPECIFICATIONS

Model EDR-0303 EDR-0505 EDR-0808
Cutting force 1 tons Max 5 tons Max 5 tons Max
Cutting size W250xL(D)250mm W450xL(D)450mm W750xL(D)750mm
Material thickness 0.05~0.3mm 0.05~0.3mm 0.05~0.3mm
Feeding precision +/-0.10mm +/-0.10mm +/-0.10mm
Punching level precision +/-0.025mm +/-0.025mm +/-0.025mm
Cutting speed 80 times/min 80 times/min 80 times/min
Power consumption 6Kw 8Kw 9Kw
Machine size Approx. L6000 x W2000 x H1680 mm Approx. L4600 x W2200 x H1900 mm Approx. L4900 x W2500 x H1900mm
Model EDR-0303
Cutting force 1 tons Max
Cutting size W250xL(D)250mm
Material thickness 0.05~0.3mm
Feeding precision +/-0.10mm
Punching level precision +/-0.025mm
Cutting speed 80 times/min
Power consumption 6Kw
Machine size Approx. L6000 x W2000 x H1680 mm
Model EDR-0505
Cutting force 5 tons Max
Cutting size W450xL(D)450mm
Material thickness 0.05~0.3mm
Feeding precision +/-0.10mm
Punching level precision +/-0.025mm
Cutting speed 80 times/min
Power consumption 8Kw
Machine size Approx. L4600 x W2200 x H1900 mm
Model EDR-0808
Cutting force 5 tons Max
Cutting size W750xL(D)750mm
Material thickness 0.05~0.3mm
Feeding precision +/-0.10mm
Punching level precision +/-0.025mm
Cutting speed 80 times/min
Power consumption 9Kw
Machine size Approx. L4900 x W2500 x H1900mm
Model EDR-1010 EDR-1212 EDR-1515
Cutting force 10 tons Max 10 tons Max 10 tons Max
Cutting size W950xL(D)950mm W1150xL(D)1150mm W1450xL(D)1450mm
Material thickness 0.05~0.3mm 0.05~0.3mm 0.05~0.3mm
Feeding precision +/-0.10mm +/-0.10mm +/-0.10mm
Punching level precision +/-0.025mm +/-0.025mm +/-0.025mm
Cutting speed 80 times/min 80 times/min 80 times/min
Power consumption 24Kw 27Kw 28Kw
Machine size Approx. L5900 x W3000 x H2000 mm Approx.L6100 x W3200 x H2000 mm Approx. L6400 x W3500 x H2000 mm
Model EDR-1010
Cutting force 10 tons Max
Cutting size W950xL(D)950mm
Material thickness 0.05~0.3mm
Feeding precision +/-0.10mm
Punching level precision +/-0.025mm
Cutting speed 80 times/min
Power consumption 24Kw
Machine size mobile Approx. L5900 x W3000 x H2000 mm
Model EDR-1212
Cutting force 10 tons Max
Cutting size W1150xL(D)1150mm
Material thickness 0.05~0.3mm
Feeding precision +/-0.10mm
Punching level precision +/-0.025mm
Cutting speed 80 times/min
Power consumption 27Kw
Machine size mobile Approx.L6100 x W3200 x H2000 mm
Model EDR-1515
Cutting force 10 tons Max
Cutting size W1450xL(D)1450mm
Material thickness 0.05~0.3mm
Feeding precision +/-0.10mm
Punching level precision +/-0.025mm
Cutting speed 80 times/min
Power consumption 28Kw
Machine size Approx. L6400 x W3500 x H2000 mm

Specifications are subject to change without notice for design improvement.

The specification can be designed by customers demand.